Turnlock blog articles

Question: Top panel would be about 15mm., , Answer: Preload is the spring force = 30N, The weight of your panel will also determine what the side loads = shea

Discover our Aluminium TurnLock parts, These parts are available in the MTH-series and the HGR-series., , Please use these studs with the following receptacles, which are also all Aluminium parts to have a lower weight:, , Please use these studs with the following receptacles, which are also all Aluminium plated to have a lower weight:,

What is the new tamper proof stud of the MHS series? The new part number for the tamper proof stud of the MHS-series is MHSTLT-*S,

What's the new part number for 5S15-*A or 5S15-*B? The new part numbers are respectively LMHTLCP-*S and LMHTLC-*SB

Half-turn fasteners, also known as TurnLocks, are a fast and efficient method for opening or shutting panels with merely a Half-turn or Quarter-turn.

How to increase clamping force in a Turnlock Assembly? In the MTH and HGR series, there exist adjustable receptacles., HGR-series:                                                                                , The advantage with this receptacle is that you can put a higher pre-loa

Do you have the receptacles 98265-2-210 available?                                                                  , Note that the receptacle 98265-2-210 is made of Silicon bronze with cadmium plating, while our receptacle HGRR33BZ is made of hard bronze with zinc plating.<

Do you offer Tridair parts?                                                                                      , , , The Tridair parts such as KNQ-2 are offered by Turnlock. Please contact us for more information on Tridair parts or KNQ-2

No, these are not required for TurnLock items.  CE marking is only needed in Europe when the fasteners would be installed in a building.

What receptacles can be used for more than 1 series? , The receptacle of the HPT-series: HPTR34Z ; can be used for both the HPT-series as the , Another example of mixed receptacles is the flat receptacle of the MHS-series

What is the difference between a TurnLock and the part number I requested?, Form Fit Functionality Material and Finish Made according to the same quality and standard Guarantee, Please contact us for the additional information or a quote. ,          

Are there any receptacles that can be welded in the HHS-series? Yes, we have 2 types of recepacles that can be welded., This is the type with welding nibs: , This process is used in mass production with which you need a special machine to do it., The receptacle that needs to be welded on by traditional manner looks like the following receptacle:, As mentioned, this receptacle needs to be welded on by the traditional manner such as TIG or MIG welding., There is also a difference in the plating. When needed to weld a receptacle to a panel,, The part number with weld nibs is HHSRFWZ (zinc plated) or HHSRFWB (blank/oil coated)

Is there an alternative for the folding bail handle HGRTLFB or MTHTLFB?, This product has a much shorter lead time than the old folding bail handle., HGRTLFB                                               HGRTLFR, MTHTLFB                                                 MTHTLFR, The folding ring handle is available in stainless steel, both in the HGR as in the MTH series., ,

Do the turnlocks lock in position, or do they move freely?   , Yes these lock in position. You need to do a quarter turn, so that the stud pin goes over the cam. Once over, it locks over the cam.

Turnlocks are also known as the lock to close a Handbag or a purse or shoulder bag. These Turnlocks are not the fasteners we are selling.

Select your stud by using below table.  the amount of protrusion of the receptacle MTHRTA16A or MTHRTA16S

With no lube, we have seen in the cycle

Question:

Question:

Yes,

NTA12

06.43809-0181 is a recept

We can help you certainly.

, , ,

Application for MPPTLB-*Z :, , ,

Is it possible to use a higher stud length with the LEA-series? Yes you can use a stud length up to 67.,

What is the clamping force of Turnlock parts?  , If you need a quarter turn with a guaranteed clamping force that is repeatable, we suggest to switch to our SPANCLAMPS:

Turnlock fasteners are used into the ISS = International Space Station

Do you have an alternative for the part 26R3-1?   Yes we do have an alternative for 26R3-1, which is the Turnlock part MTHRPM2HA, , ,   When you require a quote for our alternative of 26R3-1, please contact [email protected]

Yes there is, the part number is LEATLSR-*Z This part is in the Light duty Easy Assembly series, and has a light tensile strength of 900 Newton.

 

Unified UNF Screw Threads ANSI B1.1

Both of these thread types are use for imperial thread.

Para empezar podemos confirmar que el acero inoxidable usado es austenítico.

The receptacles Camloc MHSRFWZ, HHSRFWZ and turnlock MTHRFWS are prepared with weld nibs.  

Do you have Milspec products? We have Turnlock parts made according to Milspec products standards.,

Does there exist a bracket mount to use with the MTH-series?, ,

Does there exist a bracket mount to use with the LEG series? The new bracket developed for the MPP-series also matches for the LEG-series., ,

There aren't many quarter turns available in stainless steel 316, there is the receptacle MHSRF33S316 and the stud MHSTLHR-10S316 but only in stud length 10., How does the turnlock assembly Stainless steel 316 work?  ,

Is there a spring loaded stud of the HHS series? , Yes there is. The old part number was the 991S02H-*AGV, which was the spring loaded stud., , , If you have a question or enquiry regarding 991S02H-*AGV or the new available part HHSTLWS-*Z, please contact our sales team on [email protected]

Does there exist a bracket mount to use with the MPP series?  , ,

The first thing you'll need to take care off is to select the correct retaining washer.

, , , , ,

The cycle number of the TurnLock quarter turn can be repeated more than 15000 times if the assembly instructions are followed.

What we Do

, , , ,

Is it possible to have a waterproof assembly of the Light duty Easy Assembly (LEA) series?

Do your fixings contain '' chrome 6 ''? No !

New to the Medium duty Push Push series is the "INVISIBLE" turnlock assembly.

With the Medium duty Push Push (MPP) series, such as MPPTL-5N, you only need to push once and it is clo

 

 

 

When making an enquiry, make sure you forward your panel thicknesses so we can calculate which stud length you need.