Turnlock blog articles

I have the following question:

Technical question according the HGR series. Why, in the catalogue, the first length is the number 3 instead of 1?

Yes, we have LN29711 parts available, however we consult to buy the alternative ROHS zinc plated version instead of the Cadmium plated version., ,    

Is there a version of the MPP series in stainless steel? Yes, we have a version of the MPP series in stainless steel:, The part looks like this when installed:, This part has a retaining force of 147 Newton. Here's a list of the part numbers:, Please contact us for an enquiry or more information.

This manufacturer provides his client a time-saving solution by installing Turnlock on their panels.

40S80-*E is a tamper proof stud which has become obsolete. You can replace it by the Turnlock HGRTLT-*SK in stainless steel.

For a project with a customer with the part number MPTTLK-03-2530S but i

The installation of following slotted retaining washers MHSWSS, MTHWSS<

Is there an insert receptacle for the MHS series? Yes there is, it has a M16x2 thread. This part used to be called V50R19-02-10-BP, , For more information on this part, please contact us!

Is there a stainless steel version of HHSTLHR-*Z?,

Can you supply the tools 4-GM or 4-PF ? These are old tools, but yes we can supply them., , Note that 4-GM-1 and 4-PF-1 for example, need to be used together

Do you have the part HHSTLHR-*Z available in Stainless steel? Yes we do, it's part number HHSTLHR-*S,

Do you have the tables for longer stud lengths in the HGR series with adjustable receptacles? , Stud length

Do the HGR studs meet or exceed the mechanical properties of MIL-F-5591?

What is the part HHSTLW-16ZBG? Is the Black glossy coated part of the HHSTLW-16Z version. More information here:

Can you supply the part 40E28-*-1AF? We can supply our new part number:,

Can you supply a spring to use with the HHS-studs? Yes, we can supply the part HHSSS which is a spring used on the studs.

Can you supply DON part numbers? Yes, these parts are available at Turnlock. The cross reference for these parts are the following: , DON part number Turnlock part number <, For more information, please contact us!

Question:

Question: We have interest in the HH parts shown below.

Here you see an installed wing head stud MTHTLW-1S on an electrical circuit board.

What Automotive Fasteners do you have available? These are the same as our push pull fasteners range.,

These parts have become obsolete. However we can suggest an alternative Turnlock part number.,

If you were using Oddie Fasteners until recently, then you are undoubtedly looking for the best alternative now.

The Alconic parts you need are old references.

For the smallest version of The Light duty One Piece Push Turn Close TurnLock series, the reference is LOPPTCTL-1Z the big one is

Yes, this company went went bankrupt. We have the following series alternatives:

Yes, we supply Steyr alternative parts. Here is a list of parts we currently hold on stock:

Do you have an alternative for this Monadnock part 1105007-5? Yes, TurnLock has a direct alternative for the parts of series,

Can Turnlock provide the SK27S3-*S parts? Turnlock can provide the MTHFTLC-*SK parts.,

Do you have an alternative part for 27S3-*S? Yes, we have our stainless steel stud MTHFTLC-*SK,

Is there an alternative part for 214-16SD? Turnlock can provide the part HGRR33S

For the stud 

What are extra heavy duty Turnlocks? Extra heavy duty Turnlocks can carry up to 22000 Newton in tensile strength.

 

The folding ring does no

Do you have a threaded receptacle for the MHS or HGR series? Yes, we have a recently developed special receptacle for the MHS and HGR series., This part is called the MHSRTM16S It is a stainless steel receptacle that needs to be screwed in to the parent material.

Here are the tables for longer stud lengths not all the stud length numbers can be made, please consult us. for plus flush grommets:

Dear Customer.

Is the 710S01-K1-1 still available? The part number 710S01-K1-1 has become an old part number.,

Our HGR series and MHS

Do you have the countersunk receptacle available 26R6-4BB? Yes, we have an alternative version available of 26R6-4BB: MTHRLWC26SK

Anemo Engineering (Alveringem, Belgium) has launched a Japanese website for its "Turnlock"

Are there high temperature stud available in the HGR series?,

What are the TurnLock Ejector spring?  

Can You Supply the part LN29711-1 ?

What can you do about the adjustable receptacle sticking out? Question: We have installed on our helicopter: MTHRA24HSA, We are happy about the system, but it seems MTHTLC-3S is too high for our configuration since we needed to adjust receptacle MTHRA24HSA., , The adjustable receptacle would also work with MTHTLC-2S or even MTHTLC-1S. The biggest issue is that the adjustable receptacle sticks out.

Are there high temperature stud available in the HGR series?,

Does Turnlock have the old MS2500 parts available? Turnlock can supply the alternative Medium duty Tiny Housed Small studs., , ,

Can you quote the  Assy fasteners 88-50-16-00007-00? see pic.

This is an application of Light Duty Easy Assembly of an installed clip-on receptacle and the stud with snap-in grommet.

Is there any way to expedite lead time? Yes, we can expedite the following parts:, Reason for this is that we can machine these parts by a subcontractor in 2 weeks instead of 16 weeks.,

Does TurnLock have small captive fasteners ? Yes we have some small captive fasteners available., For more information on small captive fasteners, please contact us.

Does Turnlock have the 26R5-* receptacles available?,

How to install an adjustable receptacle? The adjustable receptacle consists of 3 parts: The cage, the insert and the pin, Please follow the following steps: 1) engage the stud 2) screw the insert to the lock condition, As panels tend to have a life of their own, just locking sequences can suddenly render a fastener too tight/too loose.

Is there a stainless steel version of the knurled slotted head stud of MTH-series? Yes there is., ,

Does Turnlock have old 2800 parts available?, Here are the Slotted head part numbers:, This is the list of the cross head part numbers:, These are the old part numbers of the Torx headed studs:, All these studs can be used with the MTH receptacles. To find the exact part number you need, please contact us.

What adjustable receptacles are available? Turnlock has adjustable receptacles available in 2 series: 1) Medium duty Tiny Housed-series, The MOST important thing about adjustable receptacles is that you can use the same stud length for different panel thicknesses., How to adjust/install:, There are regular adjustable and floating adjustable receptacles., In this video we show you how to adjust the depth of the receptacle:, There is also a special type of receptalce: The adjustable threaded receptacle, By screwing this into the prepared tapped hole,,

Question : Hi there,

Does chrome plating have a better corrosion resistance than zinc plated parts?, For example, the part MTHTLK-*C,

Question:

The length of a stud the  medium duty tiny housed turnlock MTHTL series is determin,

Can you supply the turn lock fastener?    Yes, TurnLock supplies the turn lock fastener.

This Turnlock tool ITRP-1Z is used to install the retaining ring on the grommet of the HGR series., , You'll notice that it is very user friendly!

The direction of the folding ring handle Turnlock when locked is can be follow:

Do you have more information on your HSA material?, The material has properties so that it has a strong tensile and shear strength. It's being used in racing, Airbus/Honeywell, etc.

The interpretation for structural is that any structure such as a faste