Selecting a Turnlock quarter-turn fastener starts with choosing the correct receptacle. The best option depends on your panel design, mounting method, access to the rear side, required duty level and installation preference.
Start with the mounting method
The most common Turnlock receptacles are fixed with rivets. This usually requires access to the rear side of the panel so the receptacle can be installed correctly. Other options include threaded receptacles, square-hole receptacles, round-hole receptacles, side-mounted receptacles and weld-on receptacles.
Riveted or Screw-Mounted Turnlock Receptacles
These receptacles are commonly mounted with rivets or screws and are often used when the back of the panel is accessible during installation.
LMH Series Light Duty Receptacle
A light-duty receptacle option for simple Turnlock quarter-turn fastening applications.
MTHR Series Receptacles
Medium-duty receptacles for applications that require a stronger quarter-turn fastening solution.
HGRTL Series Receptacles
A receptacle series for heavier Turnlock fastening applications where a secure hold is required.
HHSTL Series Heavy Duty Receptacles
Heavy-duty receptacles for demanding Turnlock applications that require higher strength.
MHSRF Series Receptacles
A Turnlock receptacle series suitable for secure mounting and reliable operation.
HPTR Receptacle Option
A related receptacle option for specific Turnlock quarter-turn fastener applications.
Special receptacle forms
Contact us if your application needs a special receptacle version.
- Rivet or screw mounting with the standard 2.5 mm diameter hole.
- Larger hole sizes, available at a higher price level.
- Countersunk holes for a flush installation.
Threaded TurnLock Receptacles
Threaded receptacles are installed into a threaded hole and are often used where access to the rear side of the frame is limited.
MPP Series Threaded Receptacle
Requires an M12x1 thread and is typically installed in blind holes. A minimum thread depth of 23 mm is required.
Open MTH Threaded Receptacles
Open threaded receptacles for medium-duty MTH Series assemblies.
Closed MTH Threaded Receptacles
The closed body provides protection against dust. These receptacles are not airtight or watertight.
Receptacles for Square Panel Holes
These receptacles are designed for panels prepared with a square hole.
LEARS Light Duty Receptacles
Light-duty receptacles for square-hole panel preparation.
LPTR Series Light Duty Receptacles
Light-duty square-hole receptacles for a 9.4 mm square hole.
MPTR Series Receptacles
Medium-duty square-hole receptacles for a 13.5 mm square hole.
Receptacles for Round Panel Holes
These receptacles are used when the panel is prepared with a round hole and often require a matching nut.
MTHR, MTHW and MTHF Series
The MTHRTZZ receptacle is used together with the MTHNZ nut for round-hole installation.
MTHRTEZZ Closed Type
The MTHRTEZZ closed type is closed against dust only. It is not air-tight or water-tight. It is used together with the MTHNZ nut.
MPP Series Medium Duty Receptacle
The MPPRZZ receptacle is used together with the MPPNZ nut. This option requires a round hole with a diameter of 12.3 mm.
Side-Mounted Turnlock Receptacles
Side-mounted receptacles are installed on the side of a panel and usually require only a hole in the panel.
LEARS Series Light Duty Side-Mounted Receptacle
A light-duty side-mounted receptacle for applications where this mounting style is preferred.
HHSTL Series Heavy Duty Side-Mounted Receptacle
A heavy-duty side-mounted receptacle for stronger Turnlock fastening requirements.
Turnlock Applications Without a Separate Receptacle
In some applications, no separate receptacle is used. Both panels are prepared for the stud, and one panel acts as the receptacle.
LOPHS Series
Light-duty option without a separate receptacle.
LOPMB Series
A very small custom-made light-duty option for electronics applications.
MWNF Series
A Turnlock solution where the prepared panel acts as the receptacle.
MSHF Series
A fastening solution for applications without a separate receptacle component.
Turnlock Receptacles for Welding
Weld-on receptacles are used when the receptacle must be permanently welded into the assembly.
MTHRFWS Weld Receptacle
A weld-on receptacle option for permanent Turnlock fastener installation.
MHSTL Series Medium Duty Weld Receptacles
Medium-duty weld-on receptacles for Turnlock fastening applications.
HHSTL Series Heavy Duty Weld Receptacle
A heavy-duty weld-on receptacle for demanding Turnlock installations.
Not sure which Turnlock receptacle you need?
Send us your panel details, mounting method and application requirements. We will help you select the right receptacle.